Materials Science and Manufacturing Engineering Miscellaneous
- Cutting tools are provided with large positive rake angle mainly for
-
View Hint View Answer Discuss in Forum
As rake angle α increases, shear plane angle φ decreases. So less force is required for cutting.
Correct Option: C
As rake angle α increases, shear plane angle φ decreases. So less force is required for cutting.
- A steel bar 200 mm in diameter is turned at a feed of 0.25 mm/rev with a depth of cut of 4 mm. The rotational speed of the workpiece is 160 rpm. The material removal rate in mm3/s is
-
View Hint View Answer Discuss in Forum
MRR = πDNdf
Correct Option: D
MRR = πDNdf
Direction: In orthogonal turning of a bar of 100 mm diameter with a feed of 0.25 mm/rev, depth of cut of 4 mm and cutting velocity of 90 m/min, it is observed that the main (tangential) cutting force is perpendicular to the friction force acting at the chip-tool interface. The main (tangential) cutting force is 1500 N.
- The normal force acting at the chip-tool interface in N is
-
View Hint View Answer Discuss in Forum
NA
Correct Option: B
NA
- The orthogonal rake angle of the cutting tool in degree is
-
View Hint View Answer Discuss in Forum
NA
Correct Option: A
NA
- Which of the following process can be used for welding of Aluminum alloys?
P. Submerged arc welding
Q. Gas metal arc welding
R. Electroslag welding
S. Gas tungsten arc welding
-
View Hint View Answer Discuss in Forum
To remove the ceramic layer of aluminium oxide, TIG is used.
Correct Option: B
To remove the ceramic layer of aluminium oxide, TIG is used.