Chemistry miscellaneous
- What are the major pollutants of cigarette smoke?
-
View Hint View Answer Discuss in Forum
Particulate matter consists of millions of tiny particles of diverse chemical composition. Particulate matter from tobacco smoke includes many particles in the size range that reflects light, which explains why tobacco smoke is easily seen by the eye. In contrast to smoke particles, gases emitted by the cigarette such as benzene and carbon monoxide (CO) are invisible to the eye. Particles smaller than 2.5 micrometers (PM2.5) are major components of cigarette smoke and can enter deep into the lung where they can cause serious health problems. The pollutants generated by the cigarette arise from the chemical process of burning organic matter, or combustion of tobacco and paper. Combustion processes, such as wood burning or waste incineration, emit thousands of pollutants, some of which are in the gas phase and some of which are in the form of small particles called particulate matter.
Correct Option: B
Particulate matter consists of millions of tiny particles of diverse chemical composition. Particulate matter from tobacco smoke includes many particles in the size range that reflects light, which explains why tobacco smoke is easily seen by the eye. In contrast to smoke particles, gases emitted by the cigarette such as benzene and carbon monoxide (CO) are invisible to the eye. Particles smaller than 2.5 micrometers (PM2.5) are major components of cigarette smoke and can enter deep into the lung where they can cause serious health problems. The pollutants generated by the cigarette arise from the chemical process of burning organic matter, or combustion of tobacco and paper. Combustion processes, such as wood burning or waste incineration, emit thousands of pollutants, some of which are in the gas phase and some of which are in the form of small particles called particulate matter.
- The amount of chlorine available in water after disinfection is called as
-
View Hint View Answer Discuss in Forum
The word “residual” means “remainder” or “that which is left”, and as the name suggests the chlorine residual is measure of the amount of chlorine remaining in the water after disinfection. The chlorine residual is usually tested in finished water which is ready to be released into the distribution system, although operators must also ensure that there is adequate residual at the extreme ends of the distribution system. Tests for chlorine residual are probably the most frequently performed tests at water treatment plants. There are three types of chlorine residual which must be considered in water treatment. Free chlorine residual - residual consisting of dissolved chlorine gas, Hypochlorous acid, and hypochlorite ions, Combined chlorine residual - residual consisting of other forms of chlorine such as chloramines which are capable of killing bacteria and oxidizing organic matter, Total chlorine residual - the sum of the free chlorine residual and the combined chlorine residual.
Correct Option: B
The word “residual” means “remainder” or “that which is left”, and as the name suggests the chlorine residual is measure of the amount of chlorine remaining in the water after disinfection. The chlorine residual is usually tested in finished water which is ready to be released into the distribution system, although operators must also ensure that there is adequate residual at the extreme ends of the distribution system. Tests for chlorine residual are probably the most frequently performed tests at water treatment plants. There are three types of chlorine residual which must be considered in water treatment. Free chlorine residual - residual consisting of dissolved chlorine gas, Hypochlorous acid, and hypochlorite ions, Combined chlorine residual - residual consisting of other forms of chlorine such as chloramines which are capable of killing bacteria and oxidizing organic matter, Total chlorine residual - the sum of the free chlorine residual and the combined chlorine residual.
- What is the maximum Water Vapour content in the atmosphere?
-
View Hint View Answer Discuss in Forum
The atmosphere of Earth is a layer of gases surrounding the planet Earth that is retained by Earth’s gravity. The atmosphere protects life on Earth by absorbing ultraviolet solar radiation, warming the surface through heat retention (greenhouse effect), and reducing temperature extremes between day and night. Air is the name given to the atmosphere used in breathing and photosynthesis. Dry air contains roughly (by volume) 78.09% nitrogen, 20.95% oxygen, 0.93% argon, 0.039% carbon dioxide, and small amounts of other gases. Air also contains a variable amount of water vapour, on average around 1% and maximum upto 4%. While air content and atmospheric pressure vary at different layers, air suitable for the survival of terrestrial plants and terrestrial animals is currently only known to be found in Earth’s troposphere and artificial atmospheres.
Correct Option: B
The atmosphere of Earth is a layer of gases surrounding the planet Earth that is retained by Earth’s gravity. The atmosphere protects life on Earth by absorbing ultraviolet solar radiation, warming the surface through heat retention (greenhouse effect), and reducing temperature extremes between day and night. Air is the name given to the atmosphere used in breathing and photosynthesis. Dry air contains roughly (by volume) 78.09% nitrogen, 20.95% oxygen, 0.93% argon, 0.039% carbon dioxide, and small amounts of other gases. Air also contains a variable amount of water vapour, on average around 1% and maximum upto 4%. While air content and atmospheric pressure vary at different layers, air suitable for the survival of terrestrial plants and terrestrial animals is currently only known to be found in Earth’s troposphere and artificial atmospheres.
- Aqua regia is a 1 : 3 mixture, by volume, of
-
View Hint View Answer Discuss in Forum
Aqua regia or nitro-hydrochloric acid is a highly corrosive mixture of acids, a fuming yellow or red solution. The mixture is formed by freshly mixing concentrated nitric acid and hydrochloric acid, usually in a volume ratio of 1:3. It was named so because it can dissolve the so-called royal or noble metals, gold and platinum. However, titanium, iridium, ruthenium, tantalum, osmium, rhodium and a few other metals are capable of withstanding its corrosive properties. Aqua regia is also used in etching and in specific analytic procedures. It is also used in some laboratories to clean glassware of organic compounds and metal particles. This method is preferred over the “traditional” chromic acid bath for cleaning NMR tubes, because no traces of paramagnetic chromium can remain to later spoil acquired spectra.
Correct Option: A
Aqua regia or nitro-hydrochloric acid is a highly corrosive mixture of acids, a fuming yellow or red solution. The mixture is formed by freshly mixing concentrated nitric acid and hydrochloric acid, usually in a volume ratio of 1:3. It was named so because it can dissolve the so-called royal or noble metals, gold and platinum. However, titanium, iridium, ruthenium, tantalum, osmium, rhodium and a few other metals are capable of withstanding its corrosive properties. Aqua regia is also used in etching and in specific analytic procedures. It is also used in some laboratories to clean glassware of organic compounds and metal particles. This method is preferred over the “traditional” chromic acid bath for cleaning NMR tubes, because no traces of paramagnetic chromium can remain to later spoil acquired spectra.
- The important ore of aluminium is
-
View Hint View Answer Discuss in Forum
Bauxite is an aluminium ore and is the main source of aluminium. This form of rock consists mostly of the minerals gibbsite, boehmite and diaspore , in a mixture with the two iron oxides goethite and hematite, the clay mineral kaolinite, and small amounts of anatase TiO2. Bauxite was named after the village Les Baux in southern France, where it was first recognised as containing aluminium and named by the French geologist Pierre Berthier in 1821. The lateritic bauxites are found mostly in the countries of the tropics. They were formed by lateritization of various silicate rocks such as granite, gneiss, basalt, syenite, and shale. In comparison with the iron-rich laterites, the formation of bauxites demands even more on intense weathering conditions in a location with very good drainage. This enables the dissolution of the kaolinite and the precipitation of the gibbsite. Zones with highest aluminium content are frequently located below a ferruginous surface layer.
Correct Option: A
Bauxite is an aluminium ore and is the main source of aluminium. This form of rock consists mostly of the minerals gibbsite, boehmite and diaspore , in a mixture with the two iron oxides goethite and hematite, the clay mineral kaolinite, and small amounts of anatase TiO2. Bauxite was named after the village Les Baux in southern France, where it was first recognised as containing aluminium and named by the French geologist Pierre Berthier in 1821. The lateritic bauxites are found mostly in the countries of the tropics. They were formed by lateritization of various silicate rocks such as granite, gneiss, basalt, syenite, and shale. In comparison with the iron-rich laterites, the formation of bauxites demands even more on intense weathering conditions in a location with very good drainage. This enables the dissolution of the kaolinite and the precipitation of the gibbsite. Zones with highest aluminium content are frequently located below a ferruginous surface layer.